Payment & Shipping Terms:
|Uc (DC):||12V||In (8/20μs):||10KA|
|Reaction Time:||﹤25NS||Leakage Current:||≤20μA|
|Working Enviroment:||-40℃-+70℃; Relative Humidity＜90%|
110v Fire resistant material DC power surge protector with working state indicator
Product description & Features & Application
This SPD is applied to provide fine over voltage protection of electronic equipment whose power is supplied by direct-current power supply. It is D-level over voltage protection device, is design according to IEC and GB standard, is available in a variety of different power supply voltage and selector corresponding specifications.
Note:This product can be customized according to your require voltage(12v,24v,48v,110v)
|Protection Class IEC61643-1||D|
|Operating Voltage (Un)||DC48V|
|Max. Continuous Operating Voltage (Uc)||DC65V|
|Nominal Discharge Current(8/20μs) (In)||10KA|
|Max. Discharge Current(8/20μs) (Imax )||20KA|
|Voltage Protection Level( Up)||380V|
|Nominal Load Current||60A|
|Material of Outer Shell||PBT UL94V-0|
|Working Environment||Temperature -40°C ~+80°C;Relative humidity<95%|
|Material of Outer Shell||Flame retardant materials|
Note:the voltage could be 12v;24v;48v,etc.also the single pole DC SPD with various voltage is available!
Product dimention and diagram
1.The lightning arrester is connec- ted with the power lines in series, then with the ground network.
2.When installation, inlet and outlet terminal of lightning protection devices will be connected with "+","-"pole of the corresponding DC power; "PE" symbol is conn- ected with grounding line; the way of wiring is the screw tight solid type.
3.All wiring must be solid and con- nect by electric. SPD grounding line: BVR≥mm².
4.Lightning proof grounding should be consistent with lightning prot- ection regulatory requirements, grounding wire should be as thick and short as possible, resistance should be less than 4Ω.
Contact Person: Lili Ling