Payment & Shipping Terms:
|Uc (DC):||110V||Protection Mode:||+/PE,-/PE|
|Reaction Time:||﹤25NS||Leakage Current:||≤20μA|
DC110v power surge protector single pole with fire resistant material
Product description & Features & Application
This DC110V SPD is applied to provide fine over voltage protection of electronic equipment whose power is supplied by direct-current power supply. It is D-level over voltage protec- tion device,is design according to IEC and GB standard, is available in a variety of differ- ent power supply voltage and selector corresponding specifications.
|Protection Class IEC61643-1||D|
|Operating Voltage (Un)||DC110V|
|Max. Continuous Operating Voltage (Uc)||DC150V|
|Nominal Discharge Current(8/20μs) (In)||5KA|
|Max. Discharge Current(8/20μs) (Imax )||10KA|
|Voltage Protection Level( Up)||380V|
|Nominal Load Current||60A|
|Material of Outer Shell||PBT UL94V-0|
|Working Environment||Temperature -40°C ~+80°C;Relative humidity<95%|
|Material of Outer Shell||Fire resistant materials|
Note:the voltage could be 12v;24v;48v,etc.also the single pole DC SPD with various voltage is available!
Product dimention and diagram
1.The lightning arrester is connec- ted with the power lines in series, then with the ground network.
2.When installation, inlet and outlet terminal of lightning protection devices will be connected with "+","-"pole of the corresponding DC power; "PE" symbol is conn- ected with grounding line; the way of wiring is the screw tight solid type.
3.All wiring must be solid and con- nect by electric. SPD grounding line: BVR≥mm².
4.Lightning proof grounding should be consistent with lightning prot- ection regulatory requirements, grounding wire should be as thick and short as possible, resistance should be less than 4Ω.
◆ The product is use for lightning protection zone: LPZ3 (D class) power lines of the lightning surge protection.
◆ It uses high temperature resistant plastic with excellent tightness, and easy to install wiring.
◆ Adopt temperature control circuit technology which has built-in over current breakers and thermal fuse circuit breakers, automatically trip because of deterioration.
Note:This product can be customized according to your require voltage(12v,24v,48v,110v)
Contact Person: Lili Ling