Payment & Shipping Terms:
|Working Voltage:||5V||Rated Current:||300mA|
|Imax. (8/20μs):||10KA||In (8/20μs):||5KA|
|Voltage Protection Level( Up):||15V||Insertion Loss:||≤0.2dB|
5v control signal line RS485 surge protection devices
|Nominal Discharge Current (8/20μs)(In)||5KA|
|Max. Discharge Current (8/20μs) (Imax.)||10KA|
|Voltage Protection Level( Up)||≤15V|
|Working Environment||Temperature:-40°C~+80°C;Relative humidity<95%|
Note:5v,12v,24v,48v,110v,170v are available!
Dimention & Diagram
1. The analog signal SPD is in series installed between signal channel and the equipment protected,the output termination is connected with the equipment protected.
2. The product adopt the way of 35 mm guide rail installation, all wires must be solid and connect by electric. analog signal SPD grounding cable: BVR≥2.5mm2.
3.Lightning proof grounding should be consistent with lightning protection regulatory requirements, grounding wire should be as thick and short as possible, resistance should be less than 4Ω.
Contact Person: Lili Ling