Payment & Shipping Terms:
|Rated Current:||300mA||Insertion Loss:||≤0.2dB|
|In (8/20μs):||5KA||Imax (8/20μs):||10KA|
|Working Frequency:||2MHz||Interface Model:||RJ11|
MODEM,ADSL and xADSL,data transmission line Rj11 surge protector
This product apply to the l ightning protection of telephone l ines, data communication l ines and other communication equipments.
◆ Adopt principle of discharging, clamping and voltage stabilization to realize effective and reliable anti-shock high-voltage pulse and accurate clamping voltage.
◆ Core components are selected international brands, with advantage of multi-level protection, low residual voltage, fast response time.
◆ Low-volume design, excellent transmission performance, large intake capacity, and long life time.
◆ Easy install and simple maintenance.
◆ Applied to RJ11 interface, suitable for the lightning protection of communication network in ADSL and xADSL, data transmission line, fax machines, PABX, trunks and other electronic equipment.
|Working Voltage (Un)||110V|
|Nominal Discharge Current (8/20μs) (In)||5KA|
|Max. Discharge Current (8/20μs) (Imax)||10KA|
|Voltage Protection Level( Up)||150V|
|Working Environment||Temperature -40°C~+80°C;Relative humidity<95%|
|Material of Shell||Aluminum alloy|
Note:there are 4poles,8poles,16poles and 24poles telephone signal surge protectors!
Dimention & Diagram
8ports RJ11 SPD installation instructio
1. The lightning protection devices are installed between signal channel and the protected device, the output termination is connected with the protected equipment.
2. All wiring must be solid and connected by electric.
3. The grounding line: BVR≥2.5mm2, should be as short as straight ,length less than 1m.
4. Lightning proof grounding should be consistent with lightning protection regulatory requirements, grounding wire should be as thick and short as possible, resistance should be less than 4Ω.
Contact Person: Lili Ling