Payment & Shipping Terms:
|Rated Current:||300mA||Insertion Loss:||≤0.2dB|
|In (8/20μs):||5KA||Imax (8/20μs):||10KA|
|Working Frequency:||2MHz||Interface Model:||RJ11|
4ports Rj11 surge protector with excellent transmission performance
◆ Low-volume design, excellent transmission performance, large intake capacity, and long life time.
◆ Easy install and simple maintenance.
|Working Voltage (Un)||110V|
|Nominal Discharge Current (8/20μs) (In)||5KA|
|Max. Discharge Current (8/20μs) (Imax)||10KA|
|Voltage Protection Level( Up)||150V|
|Working Environment||Temperature -40°C~+80°C;Relative humidity<95%|
|Material of Shell||Aluminum alloy|
Note:there are 4poles,8poles,16poles and 24poles telephone signal surge protectors!
Dimention & Diagram
8ports RJ11 SPD installation instruction
1. The lightning protection devices are installed between signal channel and the protected device, the output termination is connected with the protected equipment.
2. All wiring must be solid and connected by electric.
3. The grounding line: BVR≥2.5mm2, should be as short as straight ,length less than 1m.
4. Lightning proof grounding should be consistent with lightning protection regulatory requirements, grounding wire should be as thick and short as possible, resistance should be less than 4Ω.
Contact Person: Lili Ling