Payment & Shipping Terms:
|Insertion Loss:||≤0.2dB||In (8/20μs):||5KA|
|Imax. (8/20μs):||10KA||Working Frequency:||10MHz|
RS232 surge protector 9 pins connector transmission channel
|Nominal Discharge Current(8/20μs)(In)||5KA|
|Max. Discharge Current (8/20μs) (Imax.)||10KA|
|Working Environment||Temperature -40°C～+80°C;Relative humidity<95%|
|Material Of Outer Shell||Aluminum alloy|
Note:9pins 15pins RS232 surge protectors are available!
1 . This product is in series installed between signal channel and equipment protected, the output interface is connected with equipment protected.
2 . All wires must be solid and connected by electric wire.
3 . Grounding of the lightning protection should comply with the lightning protection standard; grounding wire should be as thick and short as possible, ground resistance should be less than 4 Ω . SPD grounding cable :BVR≥ 2.5mm2, the length of the ground wire should be less than 1m.
Contact Person: Lili Ling