Payment & Shipping Terms:
|Insertion Loss:||≤0.2dB||Response Time:||≤1ns|
|Rated Current:||850mA||Transmission Rate(bps):||10/100/1000M|
4 ports poe surge protector rj45 Ethernet surge arrester for cabinet
|Protection Range||Power||Network Signal|
|Working Voltage (Un)||48V||5V|
|Impulse Voltage (10/700μs)||C-X:6KV;X-X(Data):2KV;X-X(Power): 2KV|
|Voltage Protection Level( Up)||C-X≤130V;X-X(Data)≤8V;X-X(Powe)≤100V|
|Protected Core||1/2,3/6 & 4/5,7/8||1~8|
|Working Environment||Temperature: -40°C +80°C; Relative humidity<95%|
|Material Of Outer Shell||Aluminum alloy|
This product installed between signal channel and equipment protected, the output interface is connected with equipment protected.
All wires must be solid and connected by electric.
The earth terminal of SPD should be connected with ground wire, terminal forks on the ground screw applied to connect with grounding collection row and earth terminal of signal SPD, after the ground wire connected well,tighten the screws.
The grounding cable:BVR≥ 2.5mm2 , the length of the ground wire should be less than 1 m.
Grounding of lightning protection should comply with the lightning protection standard; grounding wire should be as thick and short as possible, ground resistance should be less than 4Ω.
Contact Person: Lili Ling